LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> STS 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Engine Mechanical - 4.6L (LH2) (5 Of 6)) >> Off-Vehicle Repair Instructions - Part 3 >> Crankshaft and Bearings Installation >> Crankshaft Installation Procedure

Crankshaft Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Crankshaft Sprocket Drive Pin
    GM947623Courtesy of GENERAL MOTORS CORP.
  1. Install the NEW crankshaft sprocket drive pin (1), if removed due to damage.
    2. Fig 2: Ensuring Proper Pin Height
    GM685378Courtesy of GENERAL MOTORS CORP.
  2. Ensure pin height (1) is 1.75-3.25 mm (0.0689-0.1280 in).
    3. Fig 3: View Of Crankshaft
    GM947617Courtesy of GENERAL MOTORS CORP.
  3. Gently lower the crankshaft into position in the cylinder block.
  4. Ensure the crankshaft turns without binding or noise.
scientia non olet · About LEMON Manuals