Tools Required

EN 46109  Guide Pin Set

Fig 1: View Of Right Camshaft Position Actuator Housing
Courtesy of GENERAL MOTORS CORP.
1. Install the right camshaft position actuator housing.
Fig 2: Locating Right Camshaft Position Actuator Housing Studs
Courtesy of GENERAL MOTORS CORP.
NOTE: Refer to Fastener Notice in Cautions and Notices.
2. Install the right camshaft position actuator housing short studs (345) and long studs (346).

   Tighten:  Tighten the right camshaft position actuator housing studs to 10 N.m (89 lb in).

Fig 3: View Of Right Intake Camshaft Sensor & Right Exhaust Camshaft Sensor
Courtesy of GENERAL MOTORS CORP.
3. Install the right camshaft position sensors.
4. Install the right camshaft position sensor bolts.

   Tighten:  Tighten the right camshaft position sensor bolts to 10 N.m (89 lb in).