Tools Required

EN 46109  Guide Pin Set

Fig 1: View Of Left CMP Actuator Housing Removal
Courtesy of GENERAL MOTORS CORP.
1. Install the left camshaft position actuator housing.
Fig 2: Locating Left Camshaft Position Actuator Housing Bolts & Studs
Courtesy of GENERAL MOTORS CORP.
NOTE: Refer to Fastener Notice in Cautions and Notices.
2. Install the left camshaft position actuator housing bolt (347), short studs (345) and long studs (346).

   Tighten:  Tighten the left camshaft position actuator housing bolts and studs to 10 N.m (89 lb in).

Fig 3: View Of Left Intake Camshaft Sensor & Left Exhaust Camshaft Sensor
Courtesy of GENERAL MOTORS CORP.
3. Install the left camshaft position sensors.
4. Install the left camshaft position sensor bolts.

   Tighten:  Tighten the left camshaft position sensor bolts to 10 N.m (89 lb in).