LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> STS 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Mechanical - 4.6L (LH2) (4 Of 6)) >> Off-Vehicle Repair Instructions - Part 2 >> Camshaft Intermediate Drive Shaft Cleaning and Inspection >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Inspecting Camshaft Intermediate Drive Shaft
    GM613411Courtesy of GENERAL MOTORS CORP.
  1. Inspect the camshaft intermediate drive shaft for the following:
    • Worn or damaged hub-to-camshaft intermediate drive shaft sprocket bearing surface (1)
    • Cracks or damage to the camshaft intermediate drive shaft fastener holes (2)
    • Restrictions to the oil passage (3)
    • Damaged or stripped thread (4)
  2. Repair or replace the camshaft intermediate drive shaft as necessary.
scientia non olet · About LEMON Manuals