Installation Procedure

WARNING: This page is about a different variant/trim than selected.

Fig 1: View Of Cylinder Head With Alignment Dowels - Right

GM522830

Courtesy of GENERAL MOTORS CORP.

Install the right cylinder head. Refer to Cylinder Head Installation - Right .
Install the following subassemblies:
- The right camshaft
  Refer to Camshaft Replacement - Right .
- The right secondary camshaft drive chain
  Refer to Secondary Camshaft Drive Chain Replacement - Right .
- The intake manifold
  Refer to Intake Manifold Replacement .
- The water crossover
  Refer to Water Outlet Housing Replacement (LH2) or Water Outlet Housing Replacement (LY7) in Engine Cooling.
- The right exhaust manifold
  Refer to Exhaust Manifold Replacement - Right (LY7) or Exhaust Manifold Replacement - Right (LH2) in Engine Exhaust.