MPH (Km/h) Indicator Inoperative

Step	Action	Value	Yes	No
Schematic Reference: Instrument Cluster Schematics
1	Did you perform the Instrument Cluster Diagnostic System Check?	-	Go to Step 2	Go to Diagnostic System Check - Instrument Cluster
2	Turn the ignition ON, with the engine OFF. Press and release the Eng/Met button. Does the MPH indicator and then the km/h indicator illuminate after each button activation?	-	Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems	Go to Step 3
3	Install a scan tool. With a scan tool, observe the English/Metric Status parameter in the Radio System Configuration data list. Press the Eng/Met button. Does the English/Metric Status parameter display Active?	-	Go to Step 4	Go to Step 5
4	Replace the IPC. Refer to Instrument Panel Cluster (IPC) Replacement . Did you find and correct the condition?	-	Go to Step 6	-
5	Replace the radio. Refer to Radio Replacement in Entertainment. Did you find and correct the condition?	-	Go to Step 6	-
6	Operate the system in order to verify the repair. Did you correct the condition?	-	System OK	Go to Step 2