Security Indicator Inoperative

Step	Action	Yes	No
Schematic Reference: Theft Deterrent System Schematics Connector End View Reference: Theft Deterrent System Connector End Views DEFINITION: The security indicator does illuminate to correctly indicate the status of the CTD system.
1	Did you perform the Theft Deterrent Diagnostic System Check?	Go to Step 2	Go to Diagnostic System Check - Theft Deterrent
2	Turn OFF the ignition. Turn ON the ignition, with the engine OFF. Observe the SECURITY indicator on the instrument cluster (IPC) during the bulb check. Does the SECURITY indicator illuminate during the bulb check?	Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems	Go to Step 3
3	Replace the instrument cluster (IPC). Refer to Instrument Panel Cluster (IPC) Replacement In Instrument Panel, Gages and Console. Did you complete the replacement?	Go to Step 4	-
4	Operate the system in order to verify the repair. Did you correct the condition?	System OK	Go to Step 2