Installation Procedure
- Connect the electrical connectors and install the sunload sensors to the defroster grille. Refer to SUNLOAD AND TWILIGHT SENTINEL SENSOR REPLACEMENT .
- Align the defroster grille (3) with the I/P carrier.NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
- Install the defroster grille fasteners (2).
Tighten
Tighten the defroster grille fasteners to 2 N.m (18 lb in).
- Install the I/P upper trim panel. Refer to TRIM PAD REPLACEMENT - INSTRUMENT PANEL (I/P) UPPER .
- Enable the SIR. Refer to ZONE 3 and ZONE 5 in Air Bag Restraint Systems.