LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2003 >> Seville STS >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag Restraint Systems >> Disabling & Activating Air Bag System >> Activating System >> Zone 3

Zone 3

  1. Ensure ignition is off and key is removed. Connect driver-side air bag module connector. See Figure. Install Connector Position Assurance (CPA) clip. Install driver-side knee bolster.
  2. Install SIR fuse in fuse block, located under rear seat cushion. See Figure. Install rear seat cushion. See REAR SEAT CUSHION  under REMOVAL & INSTALLATION. Staying well away from air bag modules, turn ignition on. Check SIR system for proper operation. See SYSTEM OPERATION CHECK .
scientia non olet · About LEMON Manuals