LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2000 >> Seville SLS >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Analog Instrument Panels >> System Tests >> Right Turn Signal Indicator Always On

Right Turn Signal Indicator Always On

  1. If lighting diagnostic system check has been performed, go to next step. If lighting diagnostic system check has not been performed, go to LIGHTING SYSTEM DIAGNOSTIC CHECK under SELF-DIAGNOSTIC SYSTEM in HEADLIGHTS - AUTOMATIC TWILIGHT SENTINEL - SEVILLE article.
  2. Check operation of exterior right turn signal lights. If exterior lights operate properly, go to next step. If exterior lights do not operate properly, repair exterior lights as necessary. See EXTERIOR LIGHTS article.
  3. Connect scan tool to Data Link Connector (DLC). See Figure . Turn ignition on. Select Instrument Panel Cluster (IPC) SPECIAL FUNCTIONS. Perform DISPLAY(S) TEST. Observe right turn signal indicator on IPC during. If right turn signal indicator illuminates and then turns off, check for intermittent connections at IPC. If right turn signal indicator illuminates and does not turn off, go to next step.
  4. Replace Instrument Panel Cluster (IPC). See INSTRUMENT PANEL CLUSTER  under REMOVAL & INSTALLATION. After repairs, go to next step.
  5. Recheck right turn signal indicator operation. If right turn signal indicator operates properly, repair is complete. If right turn signal indicator does not operate properly, go to step  2 .
scientia non olet · About LEMON Manuals