Mph (Km/H) Indicator Inoperative
NOTE:
MPH or km/h indicator does not illuminate.
- If instrument cluster diagnostic system check was performed, go to next step. If instrument cluster diagnostic system check was not performed, go to INSTRUMENT CLUSTER DIAGNOSTIC SYSTEM CHECK under SELF-DIAGNOSTIC SYSTEM.
- Turn ignition off and back on. This will activate Instrument Panel Cluster (IPC) bulb check. Observe MPH or km/h indicator during the bulb check. If MPH or km/h indicator illuminates during bulb check and then turns off, check for intermittent connections or faulty circuits. If MPH or km/h indicator does not illuminate during bulb check and then turn off, go to next step.
- Replace Instrument Panel Cluster (IPC). See INSTRUMENT PANEL CLUSTER under REMOVAL & INSTALLATION. After repairs, go to next step.
- After repairs, recheck operation of indicator. If indicator operates properly, repair is complete. If indicator does not operate properly, go to step 2 .