Removal Procedure
Instrument Panel Assembly (1) - Remove - Instrument Panel Assembly Replacement
Steering Column (1) - Remove -
Windshield Defroster Outlet Duct (1) - Remove - Windshield Defroster Outlet Duct Replacement
Side Window Defogger Outlet Duct - Right Side (1) - Remove - Side Window Defogger Outlet Duct Replacement - Right Side
Instrument Panel Outer Air Outlet Duct - Right Side (1) - Remove - Instrument Panel Outer Air Outlet Duct Replacement - Right Side
Side Window Defogger Outlet Duct - Left Side (1) - Remove - Side Window Defogger Outlet Duct Replacement - Left Side
Instrument Panel Outer Air Outlet Duct - Left Side (1) - Remove - Instrument Panel Outer Air Outlet Duct Replacement - Left Side
Instrument Panel Air Outlet Duct (2) - Remove - Instrument Panel Air Outlet Duct Replacement (Center)
Remove the left and right instrument panel tie bar brace (2). Instrument Panel Tie Bar Brace Replacement
- Communication Interface Module Bracket - Remove - Communication Interface Module Bracket Replacement
Instrument Panel Lower Trim Panel Insulator - Right Side (2) - Remove - Instrument Panel Lower Trim Panel Insulator Replacement - Right Side
Human Machine Interface Control Module Bypass Module Bracket (2) - Remove - Human-Machine Interface Control Module Bypass Module Bracket Replacement
Radio Bracket (3) - Remove - Radio Bracket Replacement
Human Machine Interface Control Module Bracket (2) - Remove - Human-Machine Interface Control Module Bracket Replacement
Brake Pedal Bracket Bolt (1) - Remove
Brake Pedal Bracket Bolt (1) - Remove [ 2x ]
Windshield Wiper Transmission (2) - Remove - Windshield Wiper Transmission Replacement
Instrument Panel Tie Bar Bolt (1) - Remove
Remove the left and right front side door (1). Front Side Door Replacement
Instrument Panel Tie Bar Bolt (1) - Remove [ 2x ]
Instrument Panel Tie Bar Bolt (1) - Remove [ 2x ]
Heater and Air Conditioning Evaporator and Blower Module Bolt (1) - Remove [ 4x ]
- NOTE:
Loosening the nut will aid in releasing the HVAC module from the tie bar.
Heater and Air Conditioning Evaporator and Blower Module Nut (1) @ Cowl Panel - Loosen
Use a suitable tool to release the HVAC module tabs (1) from the tie bar.
Instrument Panel Tie Bar Bolt (1) - Remove [ 2x ]
- Note the location and routing of the instrument panel wiring harness prior to removal to ensure proper installation.
- Support the HVAC module in order to prevent damage.
- With the aid of an assistant, remove the instrument panel tie bar assembly from the vehicle. (2)
- Transfer components as necessary.