LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2020 >> Enclave Premium, AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Brake Fluid Level Indicator Switch Replacement >> Removal Procedure

Removal Procedure

  1. Without disconnecting the hoses, remove and position aside the radiator surge tank. - Radiator Surge Tank Replacement
  2. Brake Fluid Level Indicator Switch Electrical Connector - Disconnect
  3. GM4292083Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Compress the locking tabs to release the switch from the master cylinder reservoir.

    Brake Fluid Level Indicator Switch(1) - Remove