LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2020 >> Enclave Premium, AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Brake Fluid Level Indicator Switch Replacement >> Installation Procedure

Installation Procedure

  1. GM4292083Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Ensure the locking tabs on the switch fully engage the master cylinder reservoir.

    Brake Fluid Level Indicator Switch(1) - Install

  2. Brake Fluid Level Indicator Switch Electrical Connector - Connect
  3. Reposition and install the radiator surge tank. - Radiator Surge Tank Replacement
scientia non olet · About LEMON Manuals