LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Regal TourX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (Automatic Transmission - 9T50 (M3D) And 9T60 (M3T) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Manual Shift Shaft Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the manual shift detent lever shaft assembly. Manual Shift Detent Lever Shaft Replacement 
  2. GM4493722Courtesy of GENERAL MOTORS COMPANY

    Remove the manual shaft seal (1) using DT-45201  remover.

scientia non olet · About LEMON Manuals