LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Regal TourX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (Automatic Transmission - 9T50 (M3D) And 9T60 (M3T) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Manual Shift Shaft Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4493153Courtesy of GENERAL MOTORS COMPANY

    Install the manual shaft seal (1) using DT-49101  seal installer.

  2. Install the manual shift detent lever shaft assembly. Manual Shift Detent Lever Shaft Replacement 
scientia non olet · About LEMON Manuals