Installation Procedure
WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
- Assemble the oil pan as necessary. Oil Pan Assemble
- Oil Pan - Install - Oil Pan Installation
Transmission Bolt (1) - Install [2x] - Transmission Replacement
Transmission Bolt (2) - Install - Transmission Replacement
Engine Oil Level Indicator Switch (1) - Connect the electrical connector.
- Exhaust Front Pipe - Install - Exhaust Front Pipe Replacement (LGX AWD)
Install the lower bracket-to-oil pan bolt (2). Transfer Case Bracket Replacement (3.6L LGX)
- Fill the engine oil to the proper level with NEW engine oil. Approximate Fluid Capacities , and Adhesives, Fluids, Lubricants, and Sealers
- Start the engine and inspect for leaks.