LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2019 >> Regal TourX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Engine Mechanical - 3.6L (LGX) - Repair Instructions) >> Repair Instructions >> Engine Front Cover Installation >> Front Cover Bolt Installation

Front Cover Bolt Installation

WARNING: This page is about a different car, the 2020 Buick Regal and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Engine Front Cover And Bolts With Tightening Sequence
GM4044435Courtesy of GENERAL MOTORS COMPANY
Front Cover Bolt Installation

Callout Component Name

Preliminary Procedure

  1. Install the oil pan after the front cover installation. Oil Pan Installation .
1 Engine Front Cover Bolt [2x]
CAUTION:

Refer to Fastener Caution .


Tighten in sequence 
15 N.m (11 lb ft)
2 Engine Front Cover Bolt [16x]
Tighten in sequence 
10 N.m (89 lb in)
3 Engine Front Cover Bolt
NOTE:

Part of engine mount on Front Wheel Drive version.


Tighten in sequence 
60 N.m (44 lb ft
4 Engine Front Cover Bolt
NOTE:

Part of engine mount on Front Wheel Drive version.


Tighten in sequence 
60 N.m (44 lb ft
scientia non olet · About LEMON Manuals