Air Cleaner Assembly Replacement (LCV)

Fig 1: Air Cleaner Assembly

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove Air Cleaner Outlet Duct. Refer to Air Cleaner Outlet Duct Replacement (LCV) Disconnect the mass airflow sensor electrical connector.
1	Intake Air Duct Clamp CAUTION: Refer to Fastener Caution . Tighten 3.5 N.m (31 lb in)
2	Intake Air Duct
3	Air Cleaner Assembly Procedure Remove the air cleaner assembly by pulling upward to release the assembly from the lower rubber grommets.