LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Verano Premium, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 2.4L (Lea)) >> Repair Instructions - On Vehicle >> Engine Front Cover Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the drive belt tensioner. Refer to Drive Belt Tensioner Replacement .
  2. Set crankshaft to TDC of combustion stroke 1. cylinder.
  3. Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement .
  4. Install the engine support fixture. Refer to Engine Support Fixture .
  5. Remove the engine mount bracket. Refer to Engine Mount Bracket Replacement .
  6. Lower the engine as deep as necessary to remove the engine front cover bolts/water pump bolt.
    7. Fig 1: Engine Front Cover, Gasket & Bolts
    GM2512770Courtesy of GENERAL MOTORS COMPANY
  7. Remove the 11 engine front cover bolts (1).
  8. Remove the engine front cover (2) and the gasket (3).
scientia non olet · About LEMON Manuals