LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Verano Leather >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.0L (LHU)) >> Repair Instructions - On Vehicle >> Oil Level Indicator Tube Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Oil Level Indicator Tube, Seal Ring & Bracket Bolt
    GM2864433Courtesy of GENERAL MOTORS COMPANY
  1. Install the oil level indicator tube (1) to the oil pan along with a NEW seal ring (3).
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the oil level indicator tube bracket bolt (2) and tighten to 10 N.m (89 lb in).
  3. Clip the ECM wiring harness, the generator wiring harness and the vacuum tank hose to the oil level indicator tube brackets.
scientia non olet · About LEMON Manuals