Engine Mount Bracket Replacement

WARNING: This page is about a different variant/trim than selected.

Fig 1: Engine Mount Bracket & Bolts

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement . Remove the engine sight shield. Refer to Engine Sight Shield Replacement . Support the engine with engine lifter. Remove the engine mount. Refer to Engine Mount Replacement . Raise the engine as much as necessary in order to reach the engine mount bracket bolts.
1	Engine Mount Bracket Bolt (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 100 (74 lb ft)
2	Engine Mount Bracket

Callout

Component Name

Preliminary Procedures

Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
Remove the engine sight shield. Refer to Engine Sight Shield Replacement .
Support the engine with engine lifter.
Remove the engine mount. Refer to Engine Mount Replacement .
Raise the engine as much as necessary in order to reach the engine mount bracket bolts.

Engine Mount Bracket Bolt (Qty: 3)

CAUTION:

Tighten
100 (74 lb ft)

Engine Mount Bracket