LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Verano Leather >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.0L (LHU)) >> Repair Instructions - On Vehicle >> Crankshaft Rear Oil Seal Replacement (Manual Transmission) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Crankshaft Rear Oil Seal & Installer
    GM2557048Courtesy of GENERAL MOTORS COMPANY
  1. Install the crankshaft rear oil seal (1) using the EN-42067  installer (2).
  2. Install the engine flywheel. Refer to Engine Flywheel Replacement .
scientia non olet · About LEMON Manuals