LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Verano Leather >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.0L (LHU)) >> Repair Instructions - On Vehicle >> Automatic Transmission Flex Plate Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the automatic transmission. Refer to Transmission Replacement (2.0L LHU) .
    2. Fig 1: Flywheel Holding Tool
    GM2512743Courtesy of GENERAL MOTORS COMPANY
  2. Install the EN-43653  holding tool (1) in the starter assembly location, engaging the automatic transmission flex plate, in order to prevent crankshaft rotation.
    3. Fig 2: Automatic Transmission Flex Plate & Bolts
    GM2834305Courtesy of GENERAL MOTORS COMPANY
  3. Remove and DISCARD the 8 automatic transmission flex plate bolts (1) and the automatic transmission flex plate (2).
scientia non olet · About LEMON Manuals