Oil Level Indicator and Tube Installation (LDK, LHU)
WARNING: This page is about a different variant/trim than selected.
- Lubricate the oil level indicator tube O-ring, refer to Adhesives, Fluids, Lubricants, and Sealers .
- Install the oil level indicator (2) and the oil level indicator tube (1) into the oil pan.
- Install the oil level indicator tube bracket to the intake manifold.
- Install the oil level indicator tube bracket bolt and tighten to 10 N.m (89 lb in).
- Install the electrical wiring harness to the oil level indicator tube.
- Install the knock sensor wiring clip into the oil level indicator tube.
CAUTION:
Refer to Fastener Caution .