LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Verano Leather >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.0L (LHU)) >> Repair Instructions - Off Vehicle >> Engine Flywheel Installation (Automatic Transmission)

Engine Flywheel Installation (Automatic Transmission)

WARNING: This page is about a different variant/trim than selected.

Special Tools

For equivalent regional tools, refer to Special Tools (LDK, LHU) .

    Fig 1: Identifying Engine Flywheel & Automatic Transmission
    GM2146391Courtesy of GENERAL MOTORS COMPANY
  1. Install the flywheel (1) for automatic transmission.
  2. Install the NEW bolts.
  3. Install EN-43653  flywheel holding tool in the starter assembly location, engaging the flywheel, in order to prevent crankshaft rotation.
  4. Tighten the flywheel bolts to 53 N.m (39 lb ft) plus 25 degreesusing the EN-45059  angle meter.
  5. Remove EN-43653  flywheel holding tool.
scientia non olet · About LEMON Manuals