LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Wheel Stud Replacement >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the front wheel bearing and hub assembly. Refer to Front Wheel Bearing and Hub Replacement (GNB)  or Front Wheel Bearing and Hub Replacement (GNA) .
    3. Fig 1: Removing Wheel Stud
    GM2911110Courtesy of GENERAL MOTORS COMPANY
  3. Use the CH-43631  separator (1) to remove the wheel stud (2) from the front wheel bearing and hub assembly. Discard the stud.
scientia non olet · About LEMON Manuals