LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating, Ventilation, And Air Conditioning >> Diagnostic Information and Procedures >> Defrosting Insufficient

Defrosting Insufficient

Step Action Yes No
DEFINITION: Time required to defrost the windshield is longer than normal.
1 Were you sent here from Symptoms or another diagnostic table? Go to Step 2  Go to Symptoms - HVAC Systems - Automatic
2
  1. Start the engine.
  2. Select the DEFROST mode.
  3. Select the maximum blower speed.
Does sufficient air flow from the defroster outlets?
Go to Step 3  Go to Step 10 
3 Measure the engine operating temperature.
Does engine reach a normal operating temperature?
Go to Step 4  Go to Step 8 
4
  1. Select the minimum blower speed.
  2. Select the maximum temperature setting.
  3. Feel the temperature of the inlet and outlet hoses at the heater core.
Does the inlet hose feel warmer than the outlet hose?
Go to Step 11  Go to Step 5 
5 Test the operation of the A/C compressor clutch.
Does the A/C compressor clutch engage?
Go to Step 7  Go to Step 6 
6 Repair the A/C compressor clutch. Refer to Air Conditioning Compressor Replacement (LEA) .
Is the repair complete?
Go to Step 14   
7 Perform the A/C system performance test. Refer to Air Conditioning (A/C) System Performance Test .
Is the A/C system operating within the specifications?
Go to Step 9  Go to Step 12 
8 Repair the low engine temperature concern. Refer to Engine Fails To Reach Normal Operating Temperature .
Is the repair complete?
Go to Step 14   
9 Inspect for correct operation of the recirculation door.
Is the recirculation door operating correctly?
Go to Step 14  Go to Step 13 
10 Repair the air delivery concern.
Is the repair complete?
Go to Step 14   
11 Repair the heating concern. Refer to Air Temperature Malfunction.
Is the repair complete?
Go to Step 14   
12 Repair the A/C performance concern. Refer to Air Conditioning (A/C) System Performance Test .
Is the repair complete?
Go to Step 14   
13 Repair the recirculation door concern.
Is the repair complete?
Go to Step 14   
14 Operate the system in order to verify the repair.
Did you find and correct the problem?
System OK Go to Step 2