Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Remove the battery tray. Refer to Battery Tray Replacement .
- Remove the shift lever and selector lever cable (2) from the transmission control housing (3).
- Remove the shift lever and selector lever cable from the shift lever and selector lever cable bracket (1) by pushing back locking rings in counter driving direction.
- Remove the shift lever and selector lever cable grommet (1) from the bulkhead.
- Remove the front floor console. Refer to Front Floor Console Replacement .
- Unlock the shift lever and selector lever cable adjust locks (2).
- Clip the shift lever and selector lever cable (3) out of the transmission control lever housing (1).