LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Controls And Fuel - 2.4L - Repair Instructions) >> Repair Instructions >> Throttle Body Assembly Replacement

Throttle Body Assembly Replacement

WARNING: This page is about a different variant/trim than selected.
Fig 1: Throttle Body Assembly & Fasteners
GM2665026Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement 
1 Throttle Body Assembly Fastener (Qty:4)
CAUTION:

Refer to Fastener Caution .


Procedure 
Disconnect the electrical connector.
Tighten 
10 N.m (89 lb in)
2 Throttle Body Assembly

Procedure

  1. Disconnect the electrical connector.
  2. Use a NEW throttle body O-ring.
  3. Perform the throttle learn procedure. Refer to Throttle/Idle Learn .
scientia non olet · About LEMON Manuals