LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Manual Transaxle Clutch) >> Repair Instructions >> Clutch Actuator Cylinder Front Pipe Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the battery tray. Refer to Battery Tray Replacement .
    2. Fig 1: View Of Radiator Surge Tank And Radiator Surge Tank Clip
    GM2027873Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Do NOT disconnect engine coolant hoses.

  2. Remove the radiator surge tank clip (2).
  3. Remove the radiator surge tank (1).

    Position the radiator surge tank (1) aside.

    4. Fig 2: Clutch Actuator Cylinder Front Pipe Retainers
    GM2028033Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Before disconnecting the clutch actuator cylinder front pipe, remove the clutch/brake fluid from the reservoir tank.

  4. Remove the clutch actuator cylinder front pipe retainer (1, 4).
  5. Remove the clutch actuator cylinder front pipe from the retainer (3).
  6. Remove the clutch actuator cylinder front pipe (2).
scientia non olet · About LEMON Manuals