Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

DTC P018B, P018C, P018D, P0231, P0232, P023F, P0641, P064A, P0606, P1255, P129E, or P12A6 are not active.
Fuel pump control is enabled and the fuel pump control state is normal.
The ignition voltage is between 11-32V.
The engine has been running for more than 30 seconds.
The engine fuel flow is not 0.
Low fuel level warning not present.
The DTC runs continuously when the conditions above are met.