Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

DTC P0016, P0017, P0030, P0036, P0053, P0054, P0101, P0102, P0103, P0106, P0107, P0108, P0111, P0112, P0113, P0114, P0116, P0117, P0118, P0119, P0128, P0131, P0132, P0133, P0134, P0135, P0137, P0138, P013A, P013B, P013E, P013F, P0140, P0141, P015A, P015B, P0178, P0179, P0201, P0202, P0203, P0204, P0261, P0262, P0264, P0265, P0267, P0268, P0270, P0271, P0300, P0301, P0302, P0303, P0304, P0340, P0341, P0365, P0366, P0411, P0442, P0443, P0446, P0449, P0452, P0453, P0455, P0458, P0459, P0496, P0498, P0499, P111E, P1133, P1248, P1249, P124A, P124B, P2147, P2148, P2150, P2151, P2153, P2154, P2156, P2157, P219A, P2227, P2228, P2229, P2230, P2269, P2270, P2271, P2440, P2444, or P2A00 is not set.
The barometric pressure (BARO) is greater than 70 kPa (10.2 psi).
The manifold absolute pressure (MAP) is between 0-200 kPa (0-29 psi).
The intake air temperature (IAT) is between -20°C and +200°C (-4 and +392°F).
The start up engine coolant temperature is warmer than -20°C (-4°F).
The fuel control intrusive diagnostics are not active.
The engine is operating under light acceleration, heavy acceleration, or cruise conditions.
DTCs P2096 and P2097 run continuously when the conditions above have been met.