Circuit/System Verification
WARNING: This page is about a different variant/trim than selected.
NOTE:
Correct any engine control DTCs before diagnosing hybrid powertrain control module DTCs.
- Verify there are no engine control or communication DTCs set.
- If a DTC is set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If a DTC is not set
- If a DTC is set
- Verify there are no hybrid/EV powertrain control module DTCs set.
- If a DTC is set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If a DTC is not set
- If a DTC is set
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- Verify the DTCs does not set.
- If the DTC sets
Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If the DTC does not set
- If the DTC sets
- All OK.