Circuit/System Description
WARNING: This page is about a different variant/trim than selected.
The humidity sensor measures the ambient humidity of the air in the sensor bore. The signal varies with intake air humidity and is displayed by the scan tool as duty cycle %. The ECM applies 5 V to the circuit. The signal circuit is shared by the humidity sensor and the intake air temperature (IAT) sensor 2. Ignition voltage and ground circuits are also supplied to the multifunction intake air sensor's internal circuits for these sensors:
- IAT Sensor 2
- Humidity sensor
- MAF sensor
The multifunction intake air sensor houses the following:
- IAT Sensor 1
- IAT Sensor 2
- Humidity sensor
- MAF sensor
- BARO pressure sensor