Conditions for Setting the DTCs
WARNING: This page is about a different variant/trim than selected.
P0097
NOTE:
The scan tool display range is between -40 and +150°C (-40 and +302°F).
The ECM detects that the IAT Sensor 2 signal is less than 13Hz, colder than -60°C (-76°F), for greater than 5s.
P0098
The ECM detects that the IAT Sensor 2 signal is greater than 390Hz, warmer than 150°C (302°F), for greater than 5s.
P0099**
NOTE:
**If applicable.
The ECM detects that the IAT sensor 2 signal is intermittent or has abruptly changed for longer than 5 s.