Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
DTC P0068
- The engine speed is at least 800 RPM.
- The ignition voltage is at least 6.4V.
- The throttle actuator control system is not in reduced power mode.
- The DTC runs continuously when the above conditions are met.
DTC P1101
- DTC P0102, P0103, P0107, P0108, P0111, P0112, P0113, P0116, P0117, P0118, P0128, P0335, or P0336 is not set
- The engine speed is between 500-6,400 RPM
- The engine coolant temperature(ECT) is between -7 to +125°C (+19 to +257°F).
- The intake air temperature(IAT) is between -20 to +125°C (-4 to +257°F).
- The DTC runs continuously when the above conditions are met.