LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 2.4L) >> Repair Instructions - On Vehicle >> Drive Belt Tensioner Replacement (LEA) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Drive Belt Tensioner
    GM1571145Courtesy of GENERAL MOTORS COMPANY
  1. Position the drive belt tensioner.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the drive belt tensioner bolt and tighten to 45 N.m (33 lb ft).
  3. Install the drive belt. Refer to Drive Belt Replacement .
scientia non olet · About LEMON Manuals