LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2015 >> Regal GS, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 2.4L) >> Repair Instructions - On Vehicle >> Crankshaft Balancer Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the wheelhouse front liner. Refer to Front Wheelhouse Front Liner Replacement .
  2. Remove the drive belt. Refer to Drive Belt Replacement .
  3. Remove the starter. Refer to Starter Replacement (LEA, LUK) .
  4. Install the J-43653  flywheel holding tool in the starter opening.
    5. Fig 1: Bolt, Washer And Crankshaft Balancer
    GM2604075Courtesy of GENERAL MOTORS COMPANY
  5. Remove the crankshaft balancer bolt (1), washer (2), and crankshaft balancer (3). Discard the crankshaft balancer bolt.
scientia non olet · About LEMON Manuals