Driver or Passenger Seat Adjuster Finish Cover Retainer Replacement (4-Way, 6-Way Power)

Fig 1: Driver or Passenger Seat Adjuster Finish Cover Retainer (4-Way, 6-Way Power)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the driver or passenger seat adjuster finish cover. Refer to Driver or Passenger Seat Adjuster Finish Cover Replacement (8-Way-Power) .
1	Driver and Passenger Seat Adjuster Finish Cover Retainer (Qty:2) CAUTION: Refer to Fastener Caution . Procedure Move the front seat to the highest position. Clip out the cap of adjuster finish cover at finish cover. Unscrew the fastener of adjuster finish cover at the finish cover. Clip off the adjuster finish cover at finish cover retainer. Clip out the wiring harness connector for the lumbar and high adjuster switch. Unscrew the bolts and remove of front seat adjuster finish cover retainer. Tighten 5 N.m (4 lb ft)
2	Driver and Passenger Seat Adjuster Finish Cover Retainer

Callout

Component Name

Preliminary Procedure
Remove the driver or passenger seat adjuster finish cover. Refer to Driver or Passenger Seat Adjuster Finish Cover Replacement (8-Way-Power) .

Driver and Passenger Seat Adjuster Finish Cover Retainer (Qty:2)

CAUTION:

Procedure

Tighten
5 N.m (4 lb ft)

Driver and Passenger Seat Adjuster Finish Cover Retainer