Front Bumper Fascia Support Replacement (Right Side)

Fig 1: Front Bumper Fascia Support (Right Side)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure  Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .
1	Front Bumper Fascia Bracket Support Fastener (Qty:3) CAUTION: Refer to Fastener Caution . Tighten  2 N.m (18 lb in)
2	Front Bumper Fascia Bracket Support Retainer
3	Front Bumper Fascia Bracket Support Procedure  Using a small flat-bladed tool, release the one outer locking retainer from the front bumper fascia outer bracket support.