Automatic Transmission Range Selector Lever Replacement

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Automatic Transmission Range Selector Lever, Washer & Fastener

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the battery tray. Refer to Battery Tray Replacement . Ensure that the shift control range select lever is in the park (P) position. Disconnect the shift control cable from the transaxle range switch lever. Depress the shift control cable retainer clip tabs and remove the shift control cable from the shift control cable bracket.
1	Automatic Transmission Range Selector Lever Fastener CAUTION: Refer to Fastener Caution . Tighten 15 N.m (11 lb ft)
2	Automatic Transmission Range Selector Lever Washer
3	Automatic Transmission Range Selector Lever