LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2012 >> Regal Turbo, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Battery, Charging System And Starting System - Non Hybrid >> Repair Instructions >> Battery Tray Replacement

Battery Tray Replacement

Fig 1: Battery Tray
GM2195910Courtesy of GENERAL MOTORS COMPANY
Battery Tray Replacement

Callout Component Name

Preliminary Procedure

  1. Remove the battery. Refer to Battery Replacement .
  2. Remove the engine control module. Refer to Engine Control Module Replacement , for the 2.0L engine or Engine Control Module Replacement for the 2.2L or 2.4L engine.
  3. Remove battery current sensor from battery tray bracket.
1 Battery Tray Bolt (Qty: 3)
CAUTION:

Refer to Fastener Caution .


Tighten 
20 N.m (15 lb ft)
2 Battery Tray
TIP:  Unclip harnesses as necessary.
scientia non olet · About LEMON Manuals