LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2008 >> Allure CXL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 5.3L) >> Repair Instructions - On Vehicle >> Engine Mount Replacement - Left Side >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Lower Engine Mount
    GM1551856Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine mount strut. Refer to Engine Mount Strut Replacement .
  2. Remove the left exhaust manifold. Refer to Exhaust Manifold Removal - Left Side .
  3. Remove the upper engine mount nuts.
  4. Install the engine support fixture. Refer to Engine Support Fixture .
  5. Using the engine support fixture, raise the engine.
    6. Fig 2: View Of Lower Engine Mount & Bolts
    GM1551854Courtesy of GENERAL MOTORS CORP.
  6. Remove the engine mount bracket bolts.
  7. Remove the engine mount bracket.
  8. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    9. Fig 3: View Of Lower Engine Mount
    GM1551858Courtesy of GENERAL MOTORS CORP.
  9. Remove the lower engine mount nuts.
  10. Remove the engine mount.
  11. Remove the engine mount heat shield, if necessary.
scientia non olet · About LEMON Manuals