LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2008 >> Allure CXL >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 5.3L) >> Repair Instructions - On Vehicle >> Engine Mount Bracket Replacement - Right Side >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Right Engine Mount
    GM1551853Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine mount strut. Refer to Engine Mount Strut Replacement .
  2. Remove the right exhaust manifold. Refer to Exhaust Manifold Removal - Right Side .
  3. Remove the upper engine mount nuts.
  4. Install the engine support fixture. Refer to Engine Support Fixture .
  5. Using the engine support fixture, raise the engine.
    6. Fig 2: View Of Engine Mount Bracket
    GM1551855Courtesy of GENERAL MOTORS CORP.
  6. Remove the engine mount bracket bolts.
  7. Remove the engine mount bracket.
scientia non olet · About LEMON Manuals