Seat Cushion Cover and Pad Replacement - Front

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Seat Cushion Cover & Pad

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice in Cautions and Notices. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the front bucket seat. Refer to Seat Replacement - Front Bucket .
1	Handle, Seat Recliner Refer to Seat Back Recliner Handle Replacement - Front .
2	Plug, Seat Recliner Handle
3	Cover, Seat Outer Adjuster Refer to Seat Adjuster Track Cover Replacement - Front .
4	Tray Assembly, Seat Refer to Storage Tray Replacement - Front Seat .
5	Cover, Seat Outer Adjuster Refer to Seat Adjuster Track Cover Replacement - Front .
6	Cover, Seat Inner Adjuster Refer to Seat Adjuster Track Cover Replacement - Front .
7	Bolt, Seat Back Recliner (Qty: 4) Tighten: 48 N.m (35 lb ft)
8	Seat Back Assembly
9	Frame Assembly, Seat Cushion Refer to Front Seat Frame Assembly Replacement - Driver or Front Seat Frame Assembly Replacement - Passenger .
10	Cushion Assembly, Seat
11	Cover, Seat Cushion Tip: The seat cushion cover is secured to the seat cushion with hog rings that must be removed when replacing the cover.