Seat Adjuster Track Cover Replacement - Front

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Seat Adjuster Track Cover

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice in Cautions and Notices. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the front bucket seat. Refer to Seat Replacement - Front Bucket .
1	Screw, Seat Recliner Handle Tighten: 2 N.m (18 lb in)
2	Handle, Seat Recliner
3	Plug, Seat Recliner Handle
4	Screw, Seat Outer Adjuster Cover (Qty: 3) Tighten: 2 N.m (18 lb in)
5	Panel, Seat Outer Adjuster
6	Screw, Seat Inner Adjuster Cover (Qty: 2) Tighten: 2 N.m (18 lb in)
7	Cover, Seat Inner Adjuster
8	Bolt, Seat Storage Tray Assembly (Qty: 2) Tighten: 32 N.m (24 lb ft)
9	Tray Assembly, Seat Storage
10	Screw, Seat Outer Adjuster Cover (Qty: 3) Tighten: 2 N.m (18 lb in)
11	Cover, Seat Outer Adjuster
12	Screw, Seat Inner Adjuster Cover (Qty: 2) Tighten: 2 N.m (18 lb in)
13	Cover, Seat Inner Adjuster