Removal Procedure
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the instrument panel (I/P) accessory trim plate. Refer to Accessory Trim Plate, Driver Information Display Switch Replacement - Instrument Panel in Instrument Panel, Gages and Console.
- Remove the HVAC control module bolts/screws.
- Pull the HVAC control module straight out from the I/P.
- Disconnect the HVAC control module electrical connectors.