LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 221 (HVAC Systems - Manual) >> Repair Instructions >> Air Temperature Actuator Replacement (Single Zone) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Air Temperature Actuator Componrnts (Single Zone)
    GM1548556Courtesy of GENERAL MOTORS CORP.
  1. Remove the driver side knee bolster. Refer to Knee Bolster, Insulator, Molding Replacement - Instrument Panel in Instrument Panel, Gages and Console.
  2. Locate the air temperature actuator (6).
  3. Disconnect the air temperature actuator electrical connector (7).
  4. Fig 2: Locating Air Temperature Actuator (Single Zone)
    GM1548532Courtesy of GENERAL MOTORS CORP.
  5. Remove the air temperature actuator bolts/screws (1).
  6. Remove the air temperature actuator (2).
  7. Remove the air temperature actuator lever (3), if necessary.