LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 198 (Wiper System & Washer System) >> Repair Instructions >> Hose Replacement - Windshield Washer >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement (Chevrolet) , Air Inlet Grille Panel Replacement (Pontiac) or Air Inlet Grille Panel Replacement (Buick) in Body Front End.
  2. Fig 1: Locating Windshield Washer Hoses
    GM1480124Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the front washer hose (1) from the retention clips (2).
  4. Disconnect the front washer hose from the air inlet grille panel.
  5. Remove the front washer hose grommet from the grille panel pinch weld.
  6. Disconnect the front washer hose from the washer solvent container (3).
  7. Fig 2: View Of Washer Pump Components
    GM512032Courtesy of GENERAL MOTORS CORP.
  8. Disconnect the front washer hose from the front washer pump.
  9. Remove the front washer hose from the vehicle.